Kinetic wireless digital doorbell uses a self-powered button with a dynamo, so it does not require batteries or wiring. Two mains-powered receivers, a range of up to 100 m, 38 melodies and three volume levels ensure convenient use at home, in the office or in a shop.
The Kinetic wireless doorbell provides a convenient and reliable solution for entrance doors. When the button is pressed, the required energy is generated by the integrated dynamo. The button is therefore self-powered and does not require battery replacement. Wireless signal transmission also allows installation without routing cables or interfering with the interior.
The system includes two receivers, which must be connected to the mains before first use. If one of the receivers does not ring, pair the devices by simultaneously holding the melody button on both receivers for 3 seconds. Successful pairing is confirmed by both receivers ringing at the same time.
- 38 selectable melodies with easy control on the receiver
- 3 volume levels
- Wireless signal range of up to 100 m
- IP54-rated button for increased resistance to dust and splashing water
- Installation using screws with wall plugs or double-sided adhesive tape
- Suitable for homes, offices and shops
Specifications
- Type
- Kinetic digital wireless doorbell system
- Number of receivers
- 2
- Frequency
- 433 MHz ± 1 MHz
- Receiver power supply
- AC 200–240 V
- Button power supply
- Self-powered by a dynamo
- Standby power consumption
- 0.25 W
- Number of melodies
- 38
- Volume settings
- 3 levels
- Button rating
- IP54
- Receiver rating
- IP20
- Range
- Up to 100 m
- Operating temperature
- -10 to +45 °C
- Receiver dimensions
- 95 × 53 × 68 mm
- Button dimensions
- 80 × 50 × 28 mm
- Colour
- Black
- Mounting method
- 2 screws with wall plugs or double-sided adhesive tape
- Weight
- Approximately 176 g
