The motion sensor monitors an area within a 360° angle and detects motion up to a distance of 6 metres. It is suitable for automatically controlling lighting in rooms, hallways or entrances.
The rotary controls allow you to easily set the activation time from 10 seconds to 7 minutes and the ambient light threshold within a range of 10–2000 lx. The light can therefore respond precisely to the conditions in the room.
The compact white design blends discreetly into the ceiling, drywall construction or furniture after installation. Spring clips make it easier to secure the sensor in a prepared opening.
The recessed motion sensor allows you to automate indoor lighting. Once motion is detected, it switches on the connected light and automatically switches it off after the selected time has elapsed. It helps increase safety when moving around in the dark while also limiting unnecessary lighting.
The sensor can be installed in the ceiling or on a side wall. The controls allow you to set the activation time from 10 seconds to 7 minutes and the ambient light level within a range of 10–2000 lx. The maximum load is 800 W.
Warning: Connection to the mains and installation must be carried out by a qualified professional in accordance with applicable electrical regulations. Always disconnect the electrical circuit from the power supply before connecting, observe the “UP” marking, use a cable with a suitable cross-section and do not exceed the maximum load. The IP20 rating is intended for indoor use only.
